Year 7 - End of Unit Assessment

• Design and technology
• Lower Secondary (Key Stage 3)

Year 7 - End of Unit Assessment

Name three things that you need to do to be safe in the workshop.

What is a Design Brief?

1. A drawing of the product.
2. Exact details of the finished product.
3. The specific details of the project.
4. One or two sentences saying what you are going to make.

Who writes a Design Brief?

1. Teacher
2. Engineer
3. Client
4. Designer

What is a Design Specification?

1. A detailed drawing of the project.
2. The specific details of the project.
3. A brief overview of the project.
4. A simple drawing of the project.

What is Sustainability? (1 mark)

What are Finite resources?

1. Non-renewable resources, will run out.
2. Recyclable materials.
3. Non-recyclable materials.
4. Renewable resources, will not run out.

What are Non-Finite resources?

1. Non-renewable resources, will run out.
2. Recyclable materials.
3. Non-recyclable materials.
4. Renewable resources, will not run out.

Name 3 of the 6 R's

1. Rethink, Renew, React
2. Regenerate, Refuse, Responsible
3. Reduce, Recycle, Reflect
4. Rethink, Repair, Reuse

Describe a practical application for one of the 6 R's stated previously. (2 marks)

what influence can young designers have on the environment? (3 marks)

How is plastic made? (2 marks)

What are the two categories of plastic?

1. Thermosetting & Thermoforming
2. Thermosetting & Thermoshaping
3. Recyclable & Non-recyclable
4. Synthetic & Natural

What is Ergonomics?

1. The measurement of the human body.
2. How comfortable something is.
3. How much something costs.
4. The relationship between people and the products they use.

What is Anthropometrics?

1. The measurement of the human body.
2. How comfortable something is.
3. How much something costs.
4. The relationship between people and the products they use.

Why do we create several Initial Design Ideas? (1 mark)

What drawing technique has been used for this drawing?

1. One Point Perspective
2. Two Point Perspective
3. Scaled Drawing
4. Sketching

What unit of measurement do Technical Drawings always use?

1. cm
2. metre
3. mm
4. inches

Out of these units, which one is the smallest?

1. cm
2. metre
3. mm
4. inches

Name this tool.

1. Hacksaw
2. Tenon saw
3. Junior hacksaw
4. Coping saw

Name this tool.

1. Chisel
2. Flat file
3. Half round file
4. Needle file

What would you use to smooth and finish plastic?

1. Wet & Dry
2. Sandpaper
3. Emery paper
4. Sanding belt

What is a Production Plan?

1. A Health and Safety document.
2. How a company works.
3. A step-by-step guide showing how to make the product.
4. What materials are needed for a project.

What characteristics do an effective logo have? (2 marks)