Electricity is: a flow of free electrons flowing from a negatively charged pole to a positively charged pole.
This flow of electrons is called: electric current.
The symbol for electric current is: I
The unit of electric current is ampere (A)
1 ampere stands for 1 coulomb flowing by per second (1 coulomb per second).
1 coulomb stands for 6.24 x 1018 electrons
Example: on average a current of 1,5 A flows through phone charging cable while it is charging. This mean 1,5 coulombs are flowing through that cable per second.
The formula to calculate current is:
I=tQ
current=timecharge
Slide 16 - Slide
Practice problem
In a school classroom there are approximately 9 LED lamps. At the end of the day after all the lamps have been turned off someone came back, because they forgot something. They turned the lamps on and took 2,5 minutes to find what they were looking for. Through one LED lamp flows a current of 30 mA. Calculate how much electric charge went through these 9 lamps during that time.
Slide 17 - Slide
Series and parallel circuits
Slide 18 - Slide
Slide 19 - Slide
Slide 20 - Slide
Slide 21 - Slide
Slide 22 - Slide
Current (I):
The amount of charge flowing by per second (coulombs/ second).
Expressed in amperes (A)
Voltage (U):
The difference in electrical potential energy between two points in a circuit.
Expressed in volts (V)
Resistance (R):
The amount something resists the flow of current.
Expressed in ohms (Ω)
Slide 23 - Slide
Slide 24 - Slide
Ohm's law
Current=ResistanceVoltage
I=RV
quantity
unit
Current (I)
Ampere (A)
Voltage (U)
Volt (V)
Resistance (R)
Ohm (Ω)
Slide 25 - Slide
Practice exercise
A) An average refrigerator works on a voltage of 120 Volts. A normal resistance for a refrigerator can be 45 Ohm. Calculate the current flowing through a refrigerator that has these properties.
B) What would the resistance on a fridge that has the same voltage have to be if it has a current of 2.4 Ampere flowing through it?
Slide 26 - Slide
3 lamps are connected to a battery in a parallel circuit. The battery supplies the circuit with 2.4 Ampere.
Because of its resistance, the second lamp gets 2/3 of the current supplied to the circuit. The rest of the current gets divided evenly over the other two lamps.