9.8 How components affect the current

 9.8 How components affect the current
1 / 26
suivant
Slide 1: Diapositive
ScienceMiddelbare schoolvmbo lwoo, vwoLeerjaar 2

Cette leçon contient 26 diapositives, avec quiz interactifs et diapositives de texte.

Éléments de cette leçon

 9.8 How components affect the current

Slide 1 - Diapositive

This lesson

  • recap quiz
  • What is voltage?
  • What is resistance?
  • Formulas Resistance and voltage

Slide 2 - Diapositive

Learning goals

  • You can explain what resistance is in your own words.
  • You can explain what voltage is in your own words.
Know the formula of resistance and do calculations with it.
  • You can describe the difference between how current is measured and how voltage is measured.

  • You can describe how voltage gets divided over series and parallel circuits.

Slide 3 - Diapositive

An iPhone charger uses a current of 0.08 ampere when connected to a European socket. With this current it takes an iPhone 12, 2 hours and 8 minutes to go from 0% to 100%. How much coulomb flew through the wire in this time?


A
576 C
B
0.224 C
C
614.5 C
D
96000 C

Slide 4 - Quiz

A current of 0,6 A flows out of the battery. What is the current flowing through each lamp?
A
0.2 A
B
0.6 A
C
0.3 A
D
1.2A

Slide 5 - Quiz

A current of 0,6 A flows out of the battery. What is the current flowing through each lamp?
A
0.2 A
B
0.6 A
C
0.3 A
D
1.2A

Slide 6 - Quiz

Current out battery = current component 1 = current component 2 =....
Series circuits
Current out battery = current branch 1 + current branch 2 +....
Parallel circuits

Slide 7 - Diapositive

Resistance & voltage

Slide 8 - Diapositive

What is resistance?
Resistance is the opposition to current flow.

Slide 9 - Diapositive

What is voltage?


1.A force needed to make the charges flow in a circuit.


(also known as potential difference)

Slide 10 - Diapositive

  • What is the difference between how you connect an ammeter and a volt meter in a circuit?


  • How does voltage get divided over series and paralel circuits?

Slide 11 - Diapositive

  • What is the difference between how you connect an ammeter and a volt meter in a circuit?
An ammeter gets connected in series while a volt meter gets connected parallel.


Slide 12 - Diapositive

  • How does voltage get divided over series and paralel circuits?
Series
Parallel
Voltage
Gets divided over the components
The same at every circuit loop.

Slide 13 - Diapositive

Homework
  • Read 9.8 + 9.9
  • Do the yellow block exercises of 9.8 and work book
  • Do the yellow block exercises of 9.9 and workbook

Slide 14 - Diapositive

 the brightness is normal with one lamp
With two lamps:  1. the lamps are dimmer 
2. The value on the ammeter is halved. 

Each component like lamp provides resistance to the flow of charge
What is Resistance: Resistance is the opposition to the flow of charge (electrons)

Slide 15 - Diapositive

With two cells 1.the lamp is brighter and the value on the ammeter is twice that it was before.

Slide 16 - Diapositive

Parallel circuit with two lamps.
1. Brightness is the same as one lamp.
2.Adding more lamps in parallel increases the current.

Slide 17 - Diapositive

Parallel circuit with two cells

Slide 18 - Diapositive

The current (I)  in the circuit depends on:
1. Voltage(V)
2. Resistance ( R)
 I = V / R (Current = Voltage Divided by Resistance)


Slide 19 - Diapositive

Formulas: resistance and voltage (Ohm's law)
 I = V / R (Current = Voltage Divided by Resistance)
I is current measured in amperes and
V is voltage measured in volts.
R is resistance measured in ohms 
Rearrenging the formula:
     V = I x R (Voltage = Current multiplied by Resistance)
R = V / I (Resistance = Voltage divided by Current)


Slide 20 - Diapositive

Resistance

Symbol: R

Unit: Ohm
 Symbol for Ohm: Ω


Resistance is the opposition to current flow.
Examples:
  • Resistance = 5 Ohm
  • R = 5 Ω

Slide 21 - Diapositive

Exercise 1
Find out the amount of current flowing through the electric heater having a voltage of 220 V and resistance is 10 Ω.


Slide 22 - Diapositive

Find out the amount of current flowing through the electric heater having a voltage of 220 V and resistance is 10 Ω.

G:   V= 220 v , R= 10Ω.
A: I =?


F: I= V/R
C:  I= 220/10=22 A

Slide 23 - Diapositive

Example 2
Find the resistance of an electrical circuit which has the voltage supply of 10 Volts and current of 0.005 A.


Slide 24 - Diapositive

Find the resistance of an electrical circuit which has the voltage supply of 10 Volts and current of 0.005 A.


G: V=10 v    I= 0.005 A

A:  R = ?
F:   R= V/I
C:  R= 10/0.005 = 2000 Ω

Slide 25 - Diapositive

Slide 26 - Lien